
Tool features
Why this tool?
- Large spindle lock button for easy and fast accessory changes
- Good handling thanks to slim housing
- Vibration Control auxiliary handle with 40% vibration reduction for low user fatigue (EN 60745)
- Soft start and starting current limitation
- Gear head can be rotated in 90° steps
- Handle can be used on right or left
Technical data
Specification overview
Rated power input | 1,200 W |
No-load speed | 11500 rpm |
Power output | 640 W |
Grinding spindle thread | M 14 |
Disc diameter | 125 mm |
Rubber backing pad, diameter | 125 mm |
Wire cup brush, diameter | 75 mm |
Length | 297 mm |
Height | 103 mm |
Weight | 2.3 kg |
Switch | 2-way |
Surface grinding (roughing) | |
---|---|
Vibration emission value ah | 6 m/s² |
Uncertainty K | 1.5 m/s² |
Sanding with sanding sheet | |
---|---|
Vibration emission value ah | 2 m/s² |
Uncertainty K | 1.5 m/s² |
![]() |
Best work results with constant speed thanks to electronic regulation of speed - even under load |
![]() |
Direct cooling For high overload capability and a long service life. |
![]() |
Outstanding user protection thanks to the anti-rotation protective guard - stands firm, even if the disc breaks |
![]() |
Comfortable working thanks to low vibration by adding rubber mounting/foam padding to the handles |
![]() |
Prevents autonomous restart of the tool after power blackout. Only through new, conscious activation will the tool be ready to use |
![]() |
Reduces the hazard of sudden tool reactions in binding conditions thanks to automatic shut-down of the tool |
![]() |
Soft start as the load and torque of the motor are temporarily reduced during start-up |
![]() |
Long lifetime of the tool as the tool shuts off in case of an extreme overload situation |