اللغه

METABO PE 15-20 RT ANGLE POLISHER

من metabo
مباع بالكامل
السعر الاصلي
1,010.00
- السعر الاصلي
1,010.00
السعر الاصلي
1,010.00
1,010.00
-
1,010.00
السعر الحالي
1,010.00

METABO PE 15-20 RT ANGLE POLISHER


آلة تلميع بعزم دوران عالٍ لصنفرة ناعمة و تلميع  الأسطح المطلية
أقصى أداء مع محرك بقوة 1500 واط وعلبة تروس ذات كفائة عزم مرتفعة
 تحكم إلكتروني بالكامل:لضبط سرعة العمل مع عدد الدورات التي تتطلبها خصائص المادة المعمول بها و المحافظة على ثبات السرعة تحت الحمل
مفتاح سرعة مزود بوظيفة القفل لتسارع متحكم فيه لعدد محدد من الدورات
 غلاف أمامي سميك و مقبض نحيف يقلل من الحاجة للصيانة و يرفع من مستوى التشغيل مع إجهاد عمل أقل
الحماية من الحمل الزائد: حماية للمحرك من الحرارة الزائدة
بدء تشغيل إلكتروني سلس لتجنب الحركات المفاجئة أثناء بدء التشغيل
الحماية من إعادة التشغيل: تمنع بدء التشغيل غير المقصود بعد انقطاع التيار الكهربائي و عودته من جديد
فحمات كربونية للتوقف التلقائي لحماية المحرك

المواصفات
أقصى حد لبطانة التلميع: 180 ملم / 7 بوصة
مدخلات الطاقة : 1500 واط
الطاقة الناتجة: 1000 وات
سرعة الدوران (بدون حمل) : 300-1900 دورة في الدقيقة
سرعة الدوران مع الحمولة المقدرة: 1720 دورة في الدقيقة
العزم: 18 نيوتن.متر / 160 رطل
 M 14 : عمود الدوران
الوزن (بدون سلك الكهرباء): 2.4 كجم / 5.3 رطل
طول السلك: 4 م / 13 قدم

مستوى الاهتزاز
أثناء التلميع: 1.6 م / ث²
مستوى التفاوت: 1.5 م / ث²

انبعاثات الضوضاء
مستوى ضغط الصوت: 79 ديسيبل
مستوى التفاوت: 3 ديسيبل

يرجى ملاحظة أن هذا المنتج (يتم بيعه بدون بطانة أو قرص تلميع)
______________

METABO PE 15-20 RT ANGLE POLISHER

  • Polishing machine with high torque for fine grinding and polishing to shine lacquered surfaces
  • Maximum performance thanks to a 1,500W engine and a powerful planetary gearbox
  • Vario-Tacho-Constamatic (VTC) full-wave electronics with adjusting wheel: to work with the number of revolutions required by the properties of the material and remains constant under load
  • Speed switch with lock function for controlled acceleration to a specified number of revolutions
  • Optimal maintenance and operation without fatigue due to a thickened front casing and a thin handle
  • Overload protection: protects the engine from overheating
  • Electronic smooth start-up for launch without aftershocks
  • Re-start protection: prevents unintentional start-up after interruption of power supply
  • Auto-stop carbon brushes to protect the motor
Characteristics
For backing pad up to maximum: 180 mm / 7 "
Rated input power: 1500 W
Output power: 1000 W
No-load speed: 300 - 1900 rpm
Revolutions at rated load: 1720 rpm
Torque: 18 Nm / 160 in-lbs
Spindle thread: M 14
Weight (without power cable): 2.4 kg / 5.3 lbs
Cable length: 4 m / 13 ft
Vibration
Polishing: 1.6 m/s²
Uncertainty of measurement K: 1.5 m/s²
Noise emission
Sound pressure level: 79 dB(A)
Uncertainty of measurement K: 3 dB(A)
Please note that this item is (delivered without backing pad and polishing pad) 

{"one"=>"", "other"=>""}