اللغه

Sanding Ball

السعر الاصلي
405.00
- السعر الاصلي
405.00
السعر الاصلي
405.00
405.00
-
405.00
السعر الحالي
405.00

Usage
• 32 mm Ball shape
• Smooth sanding with Tungsten Carbide coating
• Detail & Sculpting Performance
• Power sanding on Ball shape (Inside)
• Special Adapter included

Angle grinder is not included
Please check your "Spindle size" of angle grinder.

Usage and Safety Precautions


 - Please read and follow all safety instructions carefully. Please keep the manual for future reference.  

 -  When operation, always wear safety equipment such as face masks and safety goggle.

 - Always secure the workpiece securely when working. 

 - Make sure that the grinder switch is off before plugging in the power cord.

 - Be careful not to touch the cutter blade. Serious injury may result.

 - Always operate the tool with both hands firmly gripped, and never leave the tool with rotation.

 - When using the tool, always use 220V without speed adjustment so that the speed does not fall below 11000RPM.

 - After operation, turn off the switch and set it down when The remaining rotation stop completely.

 - Please be sure to use it carefully because it may cause the rotation reaction(kick back) depending on the direction of rotation.

 - Please remove the stone, sand and other material beforehand to use. If not, you may get blades damage.

Maintenance and inspection


​- Inspect and tighten the bolts of each part before operation.
 
- After working, please keep clean so that there is no foreign matter such as dust, sawdust and rosin.

 
​- If the cutter blade or belt is worn out, replace it with a new one.

Quality display


- Manufacturer : MANPA corporation.

- Country of manufacture : Made in USA

{"one"=>"", "other"=>""}